- Hoist with the same features as per fixed execution
- Maximum capacity is up to 20.000 Kg, rope falls 2 and 4
- The hoist is set-down on the trolley that runs on the lower flange of the beam .
- Supporting bars with circular cross sections which support the hoist in a set-down position.
- Counterbalance on the supporting bar in order to balance the eccentric weight of the hoist.
- The trolley is composed of an idler wheel assembly and a drive wheel assembly, both have two wheels made of machined pressed steel and mounted on spherical bearings which are permanently lubricated.
- The wheels of the drive wheel assembly are opposing and have a crown gear wheel and are connected by a transmission bar.
- The steel supporting plates are adjustable along the bar and have anti derailment device.
- The trolley motor is conical self-braking type, progressive start up and can be supplied :
- 1 travel speed of 8 m/min or 10 m/min or16 m/min or 20 m/min
- 2 travel speed of 16/4 m/min or 20/5 m/min
- The reducer is made with gears with helicoidally teeth which are permanently lubricated in an oil bath.
Electric wire rope hoist
in configuration with low headroom monorail trolley DST/R
In this configuration the DRH hoist is supplied in low headroom execution for maximum height of lift. It is compact and runs on a single beam; it is operated electrically.
Product Images
